Every 5,000 Miles
- Engine Oil & Filter Service
- Tire Inspection (tread depth, wear patterns, pressure)
- Brake Inspection (pads, rotors, fluid level)
- Suspension Inspection (bushings, shock absorbers, springs)
- Wiper Blade Inspection
- Accessory Drive Belt Inspection
- Coolant Leak Inspection
- Engine Oil Leak Inspection
- Inspect for Other Fluid Leaks
Every 15,000 Miles
(Includes all 5,000 mile services, plus:)
- Engine Air Filter Replacement
- Cabin Air Filter Replacement
- Note: May require more frequent replacement during high pollen seasons
Every 30,000 Miles
(Includes all 5,000 and 15,000 mile services, plus:)
- Vehicle Check Service (per iDrive counter recommendation, every 30,000 Miles or Every 2 Years)
- Spark Plug Replacement (Turbocharged M Engines)
Every 45,000 Miles
(Includes all 5,000, 15,000 and 30,000 mile services, plus:)
- Front Differential Fluid Service (M Models only)
- Rear Differential Fluid Service (M Models only)
Every 60,000 Miles
(Includes all 5,000, 15,000, and 30,000 mile services, plus:)
- Transmission Filter & Fluid Service
- Transfer Case Fluid Service (xDrive models only)
- Front Differential Fluid Service (Non-M Models)
- Rear Differential Fluid Service (Non-M Models)
- Spark Plug Replacement (Turbocharged engines, excluding M engines)
Every 100,000 Miles
(Includes all applicable services above, plus:)
- Spark Plug Replacement (Naturally Aspirated engines only)
- Timing Chain and Oil Pump Drive Chain Replacement (N20 Engines)
Every 2 Years (Time-Based)
- Brake Fluid Flush (regardless of mileage)
- A/C System Service – R1234YF Systems (remove moisture, verify refrigerant charge)
Every 4 Years (Time-Based)
- A/C System Service – R134a Systems (remove moisture, verify refrigerant charge)
As Needed
- Wheel Alignment
- When installing new tires
- After any suspension repair involving disconnection of suspension arms
- After engine repairs requiring front subframe lowering or removal
- Coolant Replacement (based on pH and freeze protection test results)
- Accessory Drive Belt Replacement (based on inspection findings)
- Coolant Hose Replacement (based on inspection findings)
Engine-Specific Spark Plug Intervals
| Engine Type | Replacement Interval |
| Turbocharged M Engines | Every 30,000 miles |
| Turbocharged Engines (Non-M) | Every 60,000 miles |
| Naturally Aspirated Engines | Every 100,000 miles |
Important Notes
- Oil Service Interval: This schedule is based on a 5,000-mile oil change interval for optimal engine protection and longevity.
- Air Filters: The 15,000-mile interval accounts for high particulate matter and pollen counts. Monitor seasonal conditions and replace earlier if necessary.
- Vehicle Check Service: Follow the counter display in your iDrive system, which typically triggers around 30,000-mile intervals.
- xDrive Models: Transfer case fluid service applies only to all-wheel-drive equipped vehicles.
- Inspections vs. Replacements: Regular inspections help catch wear items before they fail. Replace components as needed based on inspection findings.
- Alignment: Proper alignment protects your tire investment and ensures even wear. Always align after tire replacement or suspension work.
This maintenance schedule is designed to exceed manufacturer recommendations and provide maximum reliability and longevity for your BMW vehicle.